Product specification

Product name: Xiaopei smart water dispenser SOLO
Color: smoky gray / malachite green / tango orange midnight blue
Size: 160*160*158(mm）
Effective capacity: 1.8L
Material: ABS
Voltage: 5V
Included: 1 host, 1 core, non-inductive three-plug adapter 1 (used by 1.5m nylon power cord)
Pets: cats and small dogs

Operation guide
When using for the first time
1. Take out the water storage tray and filter element tray.
2. Fully soak the new filter element in water for 10 minutes and rinse it. It is recommended to repeat twice
3. Put the filter element unit into the filter element tray.
4. Take out the power adapter, insert it into the power jack in the bottom groove of the host, and press the excess cord into the power cord fixing slot at the bottom of the machine to reduce the possibility of being played by pets.
5. Plug in the power supply correctly, and the water will start to work after the power is turned on
6. Double-click to switch between SMART and N○RMAL modes.
7 When using at night, you can press and hold the button for five seconds to turn off the light display.
Filter replacement instructions
1. The filter element is recommended to be replaced every month to achieve a good filtering effect. (Replace the filter element every 3 months in smart mode)
2. The new filter element is soaked in clean water for 10 minutes (to activate the ion exchange resin before use
3. After replacing the filter element, press and hold the button on the front panel for 5 seconds and hear the buzzer: the rear orange light goes out, which means that the filter element use time is reset

Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....

Thương hiệu: Xiaomi

Xiaomi Petkit Nước Hình Thú Cưng Ăn Mèo Vòi Phun Nước 1.8L Chó Ăn Tự Động Lưu Thông Vòi